Cooper Security 9651 Guide de l'utilisateur télécharger pdf (Page 20)

4. Special Functions

Page 20 11980075

Requiring User Code before Installer Code

You can specify that a user code must be entered before the installer code to

access the installer menu. This enables you to supervise installer activities.

1. Key in an access code (or present a tag).

2. Press 3 to toggle between requiring and

not requiring a user code.

The display shows (for example):

UserCode req=OFF

When you turn user code on or off, the

keypad confirms with a double "beep".

Press y.

Reading the Log

The system keeps a log of the last 700 events. The Appendix on page 26

explains the meaning of the messages that may be logged.

To view the log:

1. Key in an access code (or present a tag).

2. Press 5.

The display shows a message describing the

most recent event (here, for example, user 1 has

changed the access code for user 2):

U01 Change U02

00:42 18/04/2005

3. Press: 1 to see earlier events

3 to see later events

4 to see the first event

6 to see the last event

Press X to stop using the log.

Note: Neither an installer nor a user can erase the log.

In the log, user codes are represented by numbers as follows:

U00 Installer U52 Control unit

U01 User 1 U53 Idle

U02 to U50 Users 2 to 50 U55 Keyswitch

U50 Guard code (if set up) U56 Remote reset

U51 Duress code U59 Forbikobler

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26 27 28

Pas de commentaire

Cooper Security 9651 Guide de l'utilisateur Page 20