Cooper Security i-on160EX Guide de l'utilisateur télécharger pdf (Page 33)

i-on160 3. Setting and Unsetting

Page 27

The table below shows the keypad message for each fault, what

the message means, and who can override the fault in either a

Security Grade 2 or Grade 3 system.

Override by:

Message Meaning Grade 2

Grade 3

Panic

A PA device is still active Installer Installer

TAMPER

A part of the system has

been tampered with.

Installer Installer

Missing

An expander or keypad

has a fault, or the

cabling between parts of

the system has a fault.

Installer Installer

Mains Fail

The AC supply has

stopped for more than

10 seconds.

User User

Batt Low/Missing

The back-up battery has

a problem.

User or

Installer

PSTN LINE FAULT

ATE L.F. ALL

Part of the

communication system

has a problem.

User or

Installer

FAULT

he system has detected

a fault not covered by

the above categories.

User User

Your system may be programmed so that only the Installer

can override this fault.

Using a Radio Keypad

Setting

Secure all your windows and doors. Make sure the system is idle,

and that you can hear the warning tones from the sounders.

1. Key in a valid access code.

2. Press either A, B, C or D to set the portion of system that

you require.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 103 104

Commentaires sur ces manuels

Pas de commentaire

Cooper Security i-on160EX Guide de l'utilisateur Page 33

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Cooper Security i-on160EX

Prodotti e manuali riguardandi Ricevitori e amplificatori Behringer ACX1800