Cooper Security M2000 Guide de l'utilisateur télécharger pdf (Page 33)

Option 2-5: Setting Up Chime Zones

This option enables you to select which

zones generate a chime if activated when

unset, or to switch chimes off. The chime

occurs only at keypads and extension

loudspeakers assigned to the same ward(s)

as the zone. Chimes must be enabled in

User option 1-5.

When a chime occurs, keypads display the

zone number if configured by the Chime

Visible setting in Engineer option 1-9-1-08.

User 2 Menu 5

Edit Chime Zones

1. Press [ to select this option.

Chime Zone:

0001 Disabled

2. Select the zone by using | or ¬, or by

entering the zone's four-digit number,

then press [. See page 53 for details

of zone numbering.

You can press r to choose the

zone on the next network. However,

if you keep scrolling, you will reach

all zones anyway.

Chime Zone:

0001 >Disabled

3. Use | or ¬, or press a hot key (0 to

3) to select the required chime (or

"Disabled"), then press [.

0=Disabled.

1=Chime 1, a single two-tone sound.

2=Chime 2, a double two-tone sound.

3=Chime 3, a triple two-tone sound.

4. Repeat from step 2 to select another

zone, or press ] to exit.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 75 76

Pas de commentaire

Cooper Security M2000 Guide de l'utilisateur Page 33