Cooper Security M800 Guide de l'utilisateur télécharger pdf (Page 26)

Setting with Ignore Errors

If Ignore errors

Ignore errorsIgnore errors

Ignore errors is used, the procedure after

attempting to set the system is as follows:

Office window

2002 Active

1. The system gives a fault tone and the

display shows all active zones in turn.

Office door

2001 Active

2. Investigate why the zones are active

and rectify the cause.



To abandon the setting procedure

without rectifying the active zones, enter

your user code again and select the

unset option.

3. When all zones are healthy, continue

with the exit procedure.

If the zones are not cleared by the end of the exit procedure:

If the zones are not cleared by the end of the exit procedure:If the zones are not cleared by the end of the exit procedure:

If the zones are not cleared by the end of the exit procedure:

! ALERTS !

16:42 Wed 16 MAR

1. The internal sounder sounds, the

external strobe flashes and the display

shows the ALERTS message. Proceed

directly to the keypad.

SET FAIL:-

Ward : 1.......

2. Enter your user code or present your

proximity tag; the display shows which

ward failed to set.

1 2 ... 21 22 23 24 25 26 27 28

Pas de commentaire

Cooper Security M800 Guide de l'utilisateur Page 26