Cooper Security Homelink 75 Guide d'installation télécharger pdf (Page 28)

Administration

Page 28

Outputs

You can operate radio output modules from the keypad,

as well as by using a telecommand. To operate an

output:

1. Enter the User Menu and select Outputs.

The display shows a list of outputs.

2. Use the u or n keys to select the output you want

to operate and then press CHANGE.

The selected output shows the word ON or OFF at

the end of its line

3. Press DONE.

The display returns to the list of outputs, and the

control unit sends a signal to the radio output

module to operate the appropriate output.

Telephone Call

If your 7510r is connected to a telecommunications line,

then you can start and end a telephone call from the

keypad. However, depending on the type of line

connected to your 7510r, you may not have complete

two way speech. If you are connected to:

PSTN You can dial out and listen to the remote end,

and also send DTMF tones from the 7510r

keypad. You can use this service for choosing

options from an automated answering service,

or to control equipment at the far end of the

line.

ISDN You can dial out and have a complete two way

speech with a person at the far end. You can

also send DTMF tones from the keypad.

GSM You can dial out and listen to the remote end,

and also send DTMF tones from the 7510r

keypad. This type of line should work with an

automated answering service, such as those

1 2 ... 23 24 25 26 27 28 29 30 31 32

Pas de commentaire

Cooper Security Homelink 75 Guide d'installation Page 28