Cooper Security i-on 16 Guide de l'utilisateur télécharger pdf (Page 7)

i-on30EX

Page 3

Do NOT site the unit:

In the entry or exit zones, or outside

the area covered by the alarm system.

Close to or on large metal structures.

Closer than one metre to mains wiring,

metal water or gas pipes, or other metal

surfaces.

Lower than two metres from the floor

(ideally).

Inside metal enclosures.

Next to electronic equipment,

particularly computers, photocopiers or

other radio equipment, CAT 5 data lines

or industrial mains equipment.

Note: Some window glasses, especially

those sold as “insulating” or “energy

conserving” may be coated with thin metal

or conducting films. These glasses are

particularly poor at transmitting radio

waves.

Guided Tour

CAUTION: All printed circuit boards for the

i-on30EX, its expanders and keypads have

been tested for Electromagnetic

Compatibility (EMC). However, when

handling the pcbs you must take the

standard precautions for handling static

sensitive devices.

Opening the Control Unit Case

To gain access to the interior of the control

unit undo the screws at the top and bottom

of the lid. Slide the lid out and away from

the case.

WARNING: When connected to the mains

with power applied mains voltages are

present on the shrouded heads of the

terminal screws of the mains connector.

1 2 3 4 5 6 7 8 9 10 11 12 ... 35 36

Commentaires sur ces manuels

Pas de commentaire