Cooper Security M-Series Guide de l'utilisateur télécharger pdf (Page 13)

11

Option

1

-

5

: Enabling Chimes

This option enables you to select which of

your wards (if any) use the chime feature. In

a ward with this feature enabled, zones that

have a Chime Tone attribute (User option 2-

5) and are in a selected ward will generate a

chime tone when activated. The wards then

remain chime-enabled until you deselect

them with this option.

A zone may generate a single, double or

triple chime, depending on the Chime Tone

attribute selected in User option 2-5.

The chime occurs only at keypads and

extension loudspeakers assigned to the

same ward(s) as the zone.

When a chime occurs, keypads display the

zone number if configured by the Chime

Visible setting in Engineer option 1-9-1.

User 1 Menu 5

Enable Chime

1. Press [ to select this option.

Chime on wards:

Ward > 1*......

2. Use the numeric keys to select the wards

you want to have chime enabled, then

press

[

. Any ward numbers shown will

be chime enabled. (A “*” indicates that

the ward will not be chime enabled, and

“.” Indicates that you have no access to

the ward.)

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 67 68

Commentaires sur ces manuels

Pas de commentaire