Cooper Security M-Series Guide de l'utilisateur télécharger pdf (Page 21)

Option

: Setting Up Shunt Groups

Shunt groups provide a simple way to

isolate zones until further notice. Each shunt

group can contain up to eight zones, and

each group can be allocated to a "Shunt"

user code. When the code is first entered,

the zones are isolated. When the code is

entered again, they are reinstated.

Although 24-hour zones are most

commonly isolated, any zone can be

assigned to a shunt group.

Any zone selected must have the

Shuntable attribute set in Engineer

option 1-1.

Entering a shunt code to reinstate zones

may start the exit timer, depending on

whether Unshunt, No Exit or Unshunt &

Exit is selected (Engineer option 1-9-1).

User 2 Menu 3

Edit Shunts

1. Press

[

to select this option.

Edit Shunt Grps

Group 01

2. Select the shunt group by using

or by entering the group number (01 to

10), then press [.

Group 01 Zone >1

Zone ----

3. The first zone assigned to the group is

displayed. This is indicated by ">1" in

the top-right corner. The bottom line

indicates the zone number, or "----" if a

zone number has not yet been

specified. (See page 49 for details of

zone numbering.)

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 67 68

Pas de commentaire

Cooper Security M-Series Guide de l'utilisateur Page 21