Cooper Security M2000 Guide de l'utilisateur télécharger pdf (Page 20)

18

Setting

Make sure the system is idle. Secure all

your windows and doors.

1. Press the appropriate button on the

telecommand.

The internal sounders give the exit tone,

and the keypad display shows the usual

exit messages.

2. Leave by the exit door and make sure it

is closed properly.

At the end of the exit time the exit tone

stops and the selected ward(s) is set.

If you hear an error tone to inform you that a

zone is still active, you may be able to carry

on setting. See page 19.

Unsetting

1. Enter by the designated entry door.

2. Press button 4 on your telecommand.

The system unsets. At this point the

system displays the standby screen.

Note that the telecommand may be

programmed to unset some wards but

not others.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26 27 28

Commentaires sur ces manuels

Pas de commentaire