Cooper Security i-on 16 Guide de l'utilisateur télécharger pdf (Page 27)

Administration

Page 25

Siren Press > to turn the siren on and off again. The

word "On" or "Off" on the display shows whether

you should be hearing the siren.

Keypad Press each key once. The display shows a

character in response. Press both PA keys

together to test. Press X to end the test.

Walk test The display shows a list of all the detectors

installed on the system. The top line of the

display shows you how many detectors remain

to be tested. Walk round and trigger each

detector. Every time you trigger a detector the

control unit gives a double tone and the display

shows an "A" at the end of the line for that

detector. Note that you cannot test 24 hour or

fire zones.

Remotes Press any button on the remote control. The

display shows the identity and user of the

remote control, and the button that the control

unit believes you pressed. Press all the buttons

on the remote control in turn.

Panic Alarms Press both buttons on the panic alarm

transmitter. The display shows the identity of

the user assigned to the panic alarm.

Proximity Tags Present the tag to the front of the keypad. The

display shows the user assigned to the tag.

System Configuration

The System Configuration option allows you to set up parts of the

system to suit your particular needs. If you need more extensive

changes to the operation of the system then you must contact

your installer.

Make sure the system is unset and the display shows the time

and date, then:

1. Enter the Menu and select System Config.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32

Pas de commentaire

Cooper Security i-on 16 Guide de l'utilisateur Page 27