Cooper Security i-on160EX Manuel d'utilisateur télécharger pdf (Page 12)

1. Introduction i-on40 & i-onEX Range

Page 6

Controls and Displays

Figure 2 shows the controls and displays available on the

keypads.

1. LCD display .

2. Programming keys. Also used to gain access to programming menus and

acknowledge alerts.

3. Navigation key

4. Setting and unsetting keys. These can be programmed to either set/unset the

system or operate output.

5. Hold Up Alarm (HUA) keys. (Also knows as PA keys.)

6. Alpha/numeric keys.

7. Set/Unset status LEDs (not used in partitioned systems).

Figure 2. Controls and Displays

Controls:

Full Sets the system. (All detectors in use.) In a

partitioned system this key‟s function can be programmed

by the installer.

B, C

and D

Part Set the system. (Some of the detectors in use.) In a

partitioned system their function can be programmed by

the installer.

Unsets the system.



In menus: scroll up. In text editing: move cursor left



In menus: scroll down. In text editing: move cursor right.



If the bottom line of the display shows a “>” at the right then

pressing this key selects the submenu named on that line.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 121 122

Pas de commentaire

Cooper Security i-on160EX Manuel d'utilisateur Page 12