Cooper Security 9751 Guide de l'utilisateur télécharger pdf (Page 40)

2. Programming Commands

Page 34 497096, issue 3

75: Level/Partition C Exit Time

This command sets the Exit Time for Level or Partition C.

Option

1 10 seconds

2 20 seconds (default)

3 30 seconds

4 45 seconds

5 60 seconds

6 120 seconds

76: Level/Partition D Exit Mode

This command sets the Exit Mode for Level or Partition D. The keypads give a

double "beep" confirmation tone at the end of all setting modes, including

Silent Set. The default is option 0, Timed.

In a single system, the options are:

Option

0 Timed. The keypad sounders and any internal sounders give a low

tone during exit of Level D. Use Command 79 to select the exit time.

1 Instant Set (no exit tone). Use this option to make the system set

without delay or exit tone.

2 Silent Set. Use this option to make the system set without an exit

tone. Use Command 79 to program the exit time.

3 Makes the Level D exit mode the same as Level A.

In a partitioned system, the options are:

Option

0 Timed. Use this option if Partition D sets after an exit time selected

using Command 79. If an Exit Terminate button is fitted, the user may

use it to shorten the exit time.

1 Terminate. Use this option if the user completes setting the partition

by pushing an Exit Terminate button connected to a keypad. The exit

time is infinite in this option.

2 Final Door Set. Use this option to complete setting the partition by

closing a door fitted with a Final Exit zone detector. The exit time is

infinite in this option.

3 Instant Set (no exit tone). Use this option to make the system set

without delay or exit tone.

4 Silent Set. Use this option to make the system set without an exit

tone. Use Command 79 to program the exit time.

5 Lock Set. See Command 39 on page 20 for an explanation.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 95 96

Pas de commentaire

Cooper Security 9751 Guide de l'utilisateur Page 40