Cooper Security 9751 Guide de l'utilisateur Page 54

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 96
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 53
2. Programming Commands
Page 48 497096, issue 3
117: Account Number
With SIA formats, the control unit can report alarms using a six-digit account
number. Use leading zeros to pad the account number to the correct length if
necessary; for example; account 1234 would be 001234. Some European
countries use letters in account numbers. The control unit accepts B, C, D, E
and F ("Zone Names" on page 7 explains how to enter characters).
In a partitioned system, you can enter up to four account numbers, one for
each partition. The display shows the partition to which each account number
applies: PA, PB, PC and PD.
118 and 119: Downloader Telephone Numbers
Use these commands to enter the telephone numbers that the communicator
will use to call the Downloader software on a remote PC (as described in the
9x5x User Guide). The numbers can contain up to 31 digits. You can use the
A key to insert a pause of four seconds, which is displayed as a comma (,).
When a number is successfully stored, the keypad gives a double "beep".
Use of the numbers depends on the setting of Command 114 (Access Mode):
° Option 0 (Attended – default): only the first number is used (Command
118).
° Option 1 (Secure Callback): both numbers are used.
° Option 2 (Unattended): the numbers are not used.
120: Enable Third Downloader Telephone Number
Use this command to instruct the control unit to accept a callback telephone
number from Downloader (independent of Commands 118 and 119). The
remote PC operator keys in this number before a connection is established
and then Downloader transmits it to the control unit. The control unit then
uses the number to call the remote PC back.
Select option 0 (the default) to disable a third callback number. Select option 1
to enable it.
121: Not used
Fast Format Channels has been replaced by Commands 191 to 198.
Vue de la page 53
1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 95 96

Commentaires sur ces manuels

Pas de commentaire