Cooper Security Homelink 75 Guide de l'utilisateur télécharger pdf (Page 32)

Programming Reference - Other Devices 7510r

Page 28

same time as the internal siren. The external siren runs

for a fixed period of 90 seconds. By default, the control

unit assigns a 750r external siren to all partitions.

To program a 750r select Other Devices – External Siren .

Adding an External Siren

To make the control unit learn the ID of an external

siren:

1. Select

Other Devices – External Siren – Add/Del Ext Siren

The display shows two possible “memory slots” for

external sirens. A slot already allocated to a siren

shows a “

” icon at the end of its line.

2. Select a free memory slot.

The display shows a message asking you to operate

the siren’s tamper.

3. Operate the siren’s tamper.

The control unit learns the siren’s identity and gives a

double beep.

Editing an External Siren

To change the partitions assigned to the external siren:

1. Select

Other Devices – External Siren – Edit Siren

The display shows a list of the available partitions

with the words “Yes” or “No” at the end of each line.

“Yes” means that the siren sounds if there is an alarm

in the Partition.

2. Select the partition that you wish to edit.

3. Press CHANGE to change a “Yes” to “No” or a “No” to

“Yes”.

4. Press DONE to store the change.

Deleting an External Siren

To remove an external siren from the system:

1. Select Other Devices – External Siren – Add/Del Ext Siren.

The display shows two possible “memory slots” for

external sirens. A slot already allocated to a siren

shows a “

” icon at the end of its line.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 83 84

Pas de commentaire

Cooper Security Homelink 75 Guide de l'utilisateur Page 32