Cooper Security Homelink 75 Guide de l'utilisateur télécharger pdf (Page 57)

7510r Programming Reference - Reporting

Page 53

Speech Dialler

Deals with recording speech messages, selecting the

alarm types that will trigger them, and selecting

destinations for the messages.

SMS

Deals with creating text messages, selecting the

alarm types that will trigger them and selecting

destinations for the messages.

Line Fail Reporting

Allows you to select how the control unit

reports a communications failure if either

the PSTN or a plug on module fails.

Primary Comms

If you have fitted a GSM or ISDN module

to the control unit you must use this

option to select which route the control

unit will pick first for sending reports.

(The option does not appear on the

display if you do not have a GSM or ISDN

module fitted.)

The control unit is designed to alert the user if it fails to

complete a programmed communication. If alarm or

social care reporting fails then the display shows an alert

icon. Although the user may acknowledge the alert, the

icon will not disappear from the display until the control

unit successfully completes its communication.

If a speech dialler or SMS report fails then the display

shows an alert icon, but the user can clear the display by

entering their access code and acknowledging the alert.

Alarms (ARC Reporting)

To program how the control unit will communicate with

an ARC select Reporting, Alarms.

Call Mode

To choose the call mode for communicating with an ARC

select: Reporting, Alarms, Call Mode. The call modes

available are:

Disabled.

The control unit disables all communications.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 83 84

Pas de commentaire

Cooper Security Homelink 75 Guide de l'utilisateur Page 57