Cooper Security i-on16 Guide d'installation télécharger pdf (Page 46)

4. Administration i-on16

Page 46

6. Press .





7. Press  until the display shows:





8. Press .

The display asks you to press

both of the buttons on the

Hold Up Alarm.

Note: If you already have a Hold Up

Alarm allocated to you then

the screen will display “Delete

Hold Up Alarm?”. See page

47.

Press



to leave the menu

without deleting the Hold Up

Alarm, or if you change your

mind and do not wish to add

a Hold Up Alarm.





9. Press and hold both buttons on

the Hold Up Alarm that you wish

to register. Hold the buttons

down until you see the transmit

LED flash.

The keypad gives a double

“beep” confirmation tone. The

keypad display shows:

The control unit learns the

identity of the Hold Up Alarm

and links it with your access

code.





followed by:





You cannot register more than one radio HUA per user. If the

control unit has already learned that radio HUA then you will hear

a low tone and the display remains unchanged, asking you to

press the buttons on the radio HUA.

If you have a radio HUA and want to know who it belongs to then

use the Test – User Hold Up Alarms menu option, see page 52 .

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 89 90

Commentaires sur ces manuels

Pas de commentaire

Cooper Security i-on16 Guide d'installation Page 46

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Cooper Security i-on16