Cooper Security 9651 Manuel d'installation télécharger pdf (Page 33)

11772232 Page 29

4. PROGRAMMING

Introduction

This chapter is divided into four sections:

1. Introduction provides an overview of how to program a 9651 control unit.

2. Programming Commands lists and describes the commands available to

program aspects of a 9651 control unit's operation.

3. Testing Commands lists and describes the commands available to test a

newly installed alarm system based on a 9651 control unit.

4. System Configurations describes how to set up a 9651 control unit so

that it complies with industry standards.

The 9651 control unit is fully programmable to accommodate individual user

and site requirements. Installers program units from the keypad. Enter

instructions using the two and three-digit commands described in

"Programming Commands". Before you start, familiarise yourself with the

control unit's functions and the programmable options described in this

manual.

For guidance on using 9651 control units, refer to the 9651 User Guide.

Operating Modes

The alarm system has three basic modes of operation that provide access to

commands appropriate to different types of users:

1. User mode allows setting, unsetting and resetting of the system, along

with some basic commands. There may be many user codes of this type.

2. Master user mode provides access to all user commands, including those

available in user mode. The master user can configure other users. There

is only one user code of this type.

3. Installer mode provides access to the installer menu, which contains the

programming and testing commands described in this Guide. There is only

one user code of this type.

To enter either of the user modes, enter a user code (which may be four or six

digits) or present a proximity tag. To select a user command, enter the

command number.

To enter installer mode, enter zero followed by the installer code (which may

be four or six digits). To select an installer command, enter the command

number.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 87 88

Pas de commentaire

Cooper Security 9651 Manuel d'installation Page 33