Cooper Security 9853 Guide d'installation télécharger pdf (Page 69)

4. Programming

496791 63

Level C Exit Time (Command 75)

This Command sets the exit time for part set C or Partition C. See “Program-

ming Commands” for options.

Level D Exit Mode (Command 76)

Command 76 specifies the exit mode for part set D or Partition D. For a

single system the options are:

Option 0 The keypad sounders and any internal sounders give a low tone

when entering part set Level D. Use Command 79 to select the

exit time.

Option 1 Instant Set (no exit tone)

Option 2 Silent Set. Use Command 79 to program the Exit time. At the end

of the exit time the keypad gives a double beep confirmation tone.

Option 3 Makes the Level D exit mode the same as Level A.

For a partitioned system the options are:

Option 0 The keypad sounders and any internal sounders give a full tone

when setting Partition D. Use Command 79 to select the exit time.

Option 1 Terminate. Use this option if the user completes setting the

Partition by pushing an exit terminate button connected to a

keypad. Note that the exit time is infinite in this option.

Option 2 Final door set. Use this option to complete setting the Partition by

closing a door fitted with a Final Exit zone detector. Note that the

exit time is infinite in this option.

Option 3 Instant Set (no exit tone)

Option 4 Silent Set. Use Command 79 to program the Exit time. At the end

of the exit time the keypad gives a double beep confirmation tone.

Option 5 Lock Set. See “Level A Exit Mode (Command 39) for an explana-

tion of Lock Set.

Note that the keypads give a double beep confirmation tone at the end of all

setting modes.

Level D Alarm Response (Command 77)

Command 77 specifies the alarm response for part set D or Partition D. In a

single system:

Option 0 Keypad sounders only.

Option 1 Internal sounders and keypad sounders.

Option 2 Local alarm (internal and external sounder only).

Option 3 Full alarm (communication and internal/external sounders).

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 101 102

Pas de commentaire

Cooper Security 9853 Guide d'installation Page 69