Cooper Security Homelink 75 Guide de l'utilisateur télécharger pdf (Page 31)

7510r Programming Reference - Other Devices

Page 27

Zone Follow

The control unit activates this output when a specified

zone has been triggered. If you select this type for a

zone then the display shows an extra “Follow” option

for the output. Use this option to select the zone you

wish the output to follow.

User Defined

Assign this output type to any outputs that you want

the user to control. The user can switch the output on

or off from the keypad, an arming station, or control

the output using a telecommand. In addition, either

the installer or the user can program this output type

with an “On Time” and an “Off Time”. The control unit

activates the output at the programmed “On Time”,

and deactivates the output at the programmed “Off

Time”.

FullSetRDY (P1 to P4)

The control unit activates this output for the selected

partition when none of the detectors are open

(active).

Part Set (P1 to P4)

The control unit activates this output when the

selected partition is part set.

Full Set (P1 to P4)

The control unit activates this output when the

selected partition is full set.

Alarm Confirmation

The panel activates this output during a confirmed

alarm.

Other Devices

Use this menu to make the 7510r control unit learn a

750r external siren, 771r remote information display,

770r Wireless Accessory Module, or 7525r remote Arming

Station.

External Siren

The 750r external siren is a weather-proof battery

powered siren designed to operate on external walls. In

an alarm the control unit triggers the external siren at the

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 83 84

Pas de commentaire

Cooper Security Homelink 75 Guide de l'utilisateur Page 31