Cooper Security Homelink 75 Guide de l'utilisateur télécharger pdf (Page 49)

7510r Programming Reference - System Options

Page 45

There are three options available:

Off

The user cannot force set the system, even if you

have applied the force set zone attribute to any

zones.

Confirm

The user can force set the system. Users employing a

telecommand to set the system must operate as

follows: 1) the user presses the appropriate button to

set the system, 2) the control unit starts an error

tone, 3) the user presses the same telecommand

button to confirm that they wish to continue setting

the system.

The user can force set the system. Users employing a

telecommand need only press the telecommand

button once to complete setting the system.

RF Siren Options

This menu allows you to select how the radio siren

responds during Fire, Burglar or PA alarms. There are two

options:

Siren + Strobe

The radio siren operates both siren and strobe in an

alarm.

Strobe

The radio siren operates the strobe only in an alarm.

Panel Siren

When installing an alarm system that complies with

PD6662:2004 the control unit cannot use any built in

sounder. To disable the built-in sounder select: System

Options, Panel Siren

. There are two options:

No The siren within the control unit is disabled.

Yes The siren within the control unit is enabled for all

alarms.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 83 84

Pas de commentaire

Cooper Security Homelink 75 Guide de l'utilisateur Page 49