Cooper Security Homelink 75 Guide de l'utilisateur télécharger pdf (Page 37)

7510r Programming Reference - Other Devices

Page 33

Arming Station

The Arming Station is a transmitter that users can

employ to set and unset partitions remotely, or operate

outputs. The Arming Station is a transmitter only, and

does not display any system information.

The Arming Station has four buttons and a small light

that glows when it transmits a signal.

When installing an Arming Station you must first teach

the control unit the Arming Station’s identity, and then

program the control unit with the function of each of the

Arming Station’s buttons.

Select the

Other Devices – Arming Station

to add, delete or

edit Arming Stations.

Adding an Arming Station

To make the control unit learn the Arming Station’s

identity.

1. Select

Other Devices – Arming Station - ADD/DEL Arming

Station.

The display shows a list of available Arming Stations

from Arming Station 1 to Arming Station 4. Each line

is a “memory slot” for learning the identity of an

individual Arming Station.

If a memory slot is aleady occupied then the end of

the line shows a “

” icon.

2. Select the memory slot that you wish to use.

The display asks you to activate the tamper switch on

the Arming Station.

3. Activate the Arming Station tamper.

The Arming Station signals its identity to the 7510r

control unit. When the control unit learns the Arming

Station’s identity it gives a double beep.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 83 84

Pas de commentaire

Cooper Security Homelink 75 Guide de l'utilisateur Page 37