Cooper Security 9751 Manuel d'installation télécharger pdf (Page 109)

4. Programming

496964 Page 101

118 and 119: Downloader Telephone Numbers

Use these Commands to program the telephone numbers that the

communicator will use to call the Downloader software on a remote PC (as

described in the "9x5x User Guide"). When a connection is made between the

control unit and the remote PC, the Downloader operator selects which of the

two numbers the control unit should use to call back (for example, home or

office), provided that Secure Callback is enabled with Command 114. The

numbers can be up to 31 digits. You can use the A key to insert a pause of

four seconds, which is displayed as a comma (,).

To enter a telephone number:

1. Enter programming mode (if you are not already there).

2. Key in 118 (or 119) Y at the keypad.

The display shows (for example):

118: DL Tel No 1_

3. Press Y.

4. Key in the digits of the number. If necessary, press D to move the cursor

to the left to edit or delete the number. Press C to move the cursor to the

right.

The display shows (for example):

118: 1234_

5. Press Y.

The keypad gives a double "beep" and the system stores the number.

120: Enable Third Downloader Telephone Number

Use this Command to instruct the control unit to accept a callback telephone

number from Downloader (independent of Commands 118 and 119). The

remote PC operator keys in this number before a connection is established

and then Downloader transmits it to the control unit. The control unit then

uses the number to call the remote PC back.

Select option 0 to disable a third callback number. Select option 1 to enable it.

121: Fast Format Channels

This Command has been replaced by Commands 191 to 198.

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 147 148

Pas de commentaire

Cooper Security 9751 Manuel d'installation Page 109