Cooper Security 9751 Manuel d'installation télécharger pdf (Page 67)

4. Programming

496964 Page 59

Adding and Deleting Tags

You can use any industry-standard ISO tag or card with the 934 module. To

purchase tags from Cooper Security, quote part number Proxtagpk5.

A tag acts as an alternative to a user access code. You can assign a user a

tag, an access code, or both. You cannot assign a tag to the Master User

(User 01), the Engineer (User 00) or, if the Guard Code facility has been

enabled using Command 181, the Guard (User 16). This means you can

assign up to 14 (or 15) tags on a system, one each for Users 02 to 15 (or 16).

When presenting a proximity tag to the keypad, whether for programming or

for normal use, make sure that the tag is touching the front of the keypad to

the left of the display as shown in Figure 35.

Figure 35. Sensitive Area for Tag

To Add a Tag

1. Key in User 01 access code while the system is unset.

The display shows:

Select?

2. Press 4 to select the change codes option.

The display shows:

Old Code= _

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 147 148

Pas de commentaire

Cooper Security 9751 Manuel d'installation Page 67