Cooper Security 9751 Guide d'installation Page 81
- Page / 96
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
4. Programming
496792 75
INTERMEDIATE
Event SIA Code CID Code
BURG RESTORE BR 130‡
DOWNLOAD SUCCESS RS 412
EXPANDER MISSING RESTORE TR 137‡
EXPANDER TAMPER RESTORE TR 137‡
GLOBAL TAMPER RESTORE TR 137‡
JAMMING XQ 380
KEYBOX CLOSED UR 150
KEYBOX OPEN UA 150
LID TAMP RESTORE TR 137‡
PASSWORD DEFAULTS LOADED RH -
SENSOR TAMPER RESTORE TR 137‡
SOUNDER TAMPER RESTORE TR 137‡
SUPERVISION FAIL BZ 381
SYS TAMPER RESTORE TR 137‡
TAMPER KEYPAD RESTORE TR -
TX BATTERY TROUBLE XT 384
FULL
Event SIA Code CID Code
AC LOST AT 301
AC RESTORE AR 301‡
AUX RESTORE YQ -
AUX TROUBLE YP -
BATT MISSING YM 311
BATT RESTORED YR 311‡
LOW BATT YT 311
LOW BATT RESTORE YR 311‡
TD (Time and day) RESET JT 625
TELCO1 FAULT LT 351
TELCO1 FAULT RESTORE LR -
USER CODE CHANGED JV -
USER CODE DELETED JX -
Figure 24. SIA Telegram Reports
Send Tamp as Burg (Command 132)
DD243: 2002 states that alarm signals and confirmation signals must be
transmitted using certain codes. In some case these codes do not conform to
Cooper Security Ltd’s implementation of the SIA standard. In addition, some
ARC’s experience problems if a control unit sends “restore” messages using
SIA. The ARC interprets “restores” as “user restores”. When using SIA
reporting Command 132 allows you to program the control unit to send
tampers as alarm, and disable the transmission of “restore” messages.
Option 0 (Default) The control unit sends all SIA messages as specified in
Command 131.
Option 1 For full alarm response the control unit sends tampers as burglary
(BA) and sends Contact ID 130 in place of Contact ID 137. In
addition the control unit does not send: FR (fire restoral), PR
(panic restoral), UR (technical restoral), BR (burglary restoral) or
TR (tamper restoral).
Contact ID Options (Command 143)
If you selected Contact ID in Command 103 then use Command 143 to
select the types of contact ID messages that will be sent.
Option 0 Mode Basic, comprises all the messages with numbers in the
“CID Code” column of Fig 24, with the exception of those marked
with an “‡”.
Option 1 Mode Basic + Restore. With this option the system sends all the
messages with numbers in the “CID Code” column of Fig 24.
- INSTALLATION AND 1
- PROGRAMMING GUIDE 1
- Contents 3
- 1. INTRODUCTION 7
- 2 496792 8
- 496792 3 9
- System Features 10
- Detectors 10
- 9954 Hardwired Expanders 10
- 9955 Radio Expander 10
- User Control 11
- 6 496792 12
- 2. Technical Description 13
- Control Unit PCB 14
- 496792 9 15
- 9954 Expander 16
- Compatible Equipment 17
- 12 496792 18
- 3. INSTALLATION 19
- Cabling Keypads and Expanders 20
- Fitting the System 21
- Fitting the Control unit Case 21
- Fitting a 9930 LCD Keypad 21
- Wiring the Control Unit 22
- Cable Entries 22
- Mains Connection 22
- Remote Keypads 23
- 18 496792 24
- 496792 19 25
- Detector Circuit Connections 26
- Connecting Expanders 27
- Using Programmable Outputs 28
- Wiring Keyswitches 29
- Using a Communicator 29
- Internal Communicator 29
- Telephone Line 29
- Line Monitoring 30
- Statutory Information 30
- Application 30
- Compatible PABXs 30
- Approval 30
- Safety Notice 31
- Connecting the Telephone Line 32
- 496792 27 33
- 28 496792 34
- 496792 29 35
- Fitting a Battery 36
- Initial Start Up 37
- 32 496792 38
- 4. Programming 39
- 34 496792 40
- 496792 35 41
- 36 496792 42
- 496792 37 43
- 38 496792 44
- 496792 39 45
- Communications Programming 46
- 496792 41 47
- 42 496792 48
- Leaving Programming Mode 49
- Engineer Reset 49
- Re-entering Programming Mode 49
- Programming Reference 50
- Country Defaults (Command 0) 50
- 496792 45 51
- 46 496792 52
- 496792 47 53
- Analyser zone types 54
- 496792 49 55
- RedCare Reset (Command 23) 56
- Status Display (Command 28) 57
- System Reset (Command 33) 58
- PA Reset (Command 34) 59
- Alarm Abort (Command 36) 59
- 54 496792 60
- Bell Delay (Command 41) 61
- Bell Duration (Command 42) 61
- CSID Code (Command 50) 62
- Abort Reset (Command 53) 63
- Sounder Tamper (Command 59) 64
- 496792 59 65
- 60 496792 66
- 496792 61 67
- 62 496792 68
- 496792 63 69
- Guide”.) 70
- Call Mode (Command 101) 71
- Reporting Type (Command 103) 72
- Dynamic Test (Command 108) 73
- Rings to Answer (Command 112) 74
- Access Mode (Command 114) 75
- Account Number (Command 117) 76
- 496792 71 77
- 72 496792 78
- (Command 125 (9752 only)) 79
- Select Language (Command 126) 79
- Report Mode (Command 131) 80
- 496792 75 81
- 76 496792 82
- 496792 77 83
- 78 496792 84
- ACPO DD243: 2002 Compliance 85
- Alarm Filtering 86
- 5. Testing 87
- 82 496792 88
- 496792 83 89
- 84 496792 90
- 496792 85 91
- 86 496792 92
- 496792 87 93
- 88 496792 94
- DECLARATION OF CONFORMA NCE 96
Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Cooper Security 9751
(16 pages)© 2020, manymanuals.fr. Tous droits réservés | 0.778 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels