Cooper Security 9751 Guide d'installation télécharger pdf (Page 9)

496792 3

1. Introduction

Operator Controls and Displays - 9930

Figure 2. 9930 Remote Keypad.

The 9930 keypad has a single line 16 character LCD display that shows first

to alarm information, level status, and programming commands. In addition

there are three LEDs with the following functions:

Glows steadily when mains power is present. Flashes when the

system is working from battery backup.

Glows steadily if a telephone line fault is present.

Glows steadily if:

a) A fault or tamper circuit is active while the system is unset.

b) The system needs an engineer or remote reset.

c) A telephone line fault is present.

In user mode, the keys provide the following functions:

9 Used to start a test of the detectors.

8 Used to start a test of the sounders and strobe.

7 Used to enable or disable the Chime facility.

6 Used to set the internal clock calendar, which provides a time

stamp on log entries.

5 Used to display the log (250 events).

4 Used to change the user access codes.

0 Used to call an ARC to request a download.

Used to enter programming and setting/unsetting commands.

Used to set the system with individual zones (including 24 hour

zones) temporarily omitted.

A,B,C,D Level setting keys. Level A sets the whole system.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 95 96

Pas de commentaire

Cooper Security 9751 Guide d'installation Page 9