Cooper Security 9751 Guide de l'utilisateur télécharger pdf (Page 12)

1. Introduction

Page 6 497096, issue 3

To Add a Tag

1. Key in User 01 access code while the system is unset.

The display shows:

Select?

2. Press 4 to select the change codes option.

The display shows:

Old Code= _

3. Enter the access code of the user for whom you want to program a tag

and press y.

The display shows the user number and any text description you have

programmed for that user.

4. Press y.

The display shows the user number and an underscore,

for example:

User 06 = _ _ _

5. Present the proximity tag to the front of the keypad (see Figure 1).

The system learns the identity of the tag and links it to that user number.

The keypad gives a double "beep" to confirm that the tag has been

learned successfully.

The keypad displays the date and time.

6. Repeat steps 1 to 5 for other tags, as necessary.

To Delete a Tag

Note: If you delete a tag, you also delete that user's access code.

1. Key in User 01 access code while the system is unset.

The display shows:

Select?

2. Press 4 to select the change codes option.

The display shows:

Old Code= _

3. Enter the User 01 access code again and press y.

The display shows "

User 01" and any text description for that user.

4. Press X repeatedly until the display shows the user number of the tag

you want to delete.

The display shows the user number and any text you have programmed

for that user.

5. Press y.

6. Key in "0000" and press y.

The system deletes the tag and the user's access code. The keypad

gives a double "beep".

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 95 96

Pas de commentaire

Cooper Security 9751 Guide de l'utilisateur Page 12