Cooper Security i-on40 Guide d'installation télécharger pdf (Page 26)

Installer Mode Programming i-on40

Page 22

Deleting an Radio Keypad

To remove a Radio Keypad from the system:

1. Select Detectors/Devices – Radio Keypad – ADD/DEL

Radio Keypad.

The bottom line of the display shows “Radio Keypad

1”. This is the first in a list of four available memory

slots for Radio Keypads. If a memory slot is occupied

then the beginning of the line shows a “*” icon.

2. Press u or n to scroll to the Radio Keypad that you

wish to delete. Then press Y.

The display asks you to confirm that you wish to

delete the selected Radio Keypad.

3. Press Y.

The control unit deletes the Radio Keypad’s identity

and gives a double beep.

Naming a Radio Keypad

1. Select Detectors/Devices – Radio Keypad.

The display shows a list of “memory slots” for the

radio keypads. If a memory slot is occupied by a

radio keypad then the bottom line of the display

shows a “*” at the beginning of the line.

2. Select the keypad that you wish to name.

The bottom line of the display shows “Name”.

3. Press >.

The top line of the display shows “Name” and the

bottom line shows the current name of the keypad

with a text entry cursor at the beginning of the line.

4. Key in the name of the radio keypad.

For hints on editing names see page 7 .

4. Press Y to save the text.

Assigning a Radio Keypad to Partitions

The i-on40 allows you to assign radio keypads to one or

more of the partitions:

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 115 116

Pas de commentaire

Cooper Security i-on40 Guide d'installation Page 26