Cooper Security i-on40 Guide d'installation télécharger pdf (Page 84)

Installer Mode Programming i-on40

Page 80

Local

Connect the control unit to a PC (for example a

laptop) using a local USB cable.

Note: The control unit will leave the Connection Type

menu if Downloader does not make a call within 30

minutes.

See "Access Mode" on page 80 if you want the control

unit to answer incoming calls from Downloader without

an Installer being present.

Rings to Answer

(This option appears only when the i-sd02 or i-gsm02

module is fitted.)

Select Downloading - Rings to Answer to set the number of

rings that the system waits before answering an incoming

call from the remote PC.

Answer On One Ring

(Also known as Answer Phone Defeat, this option appears

only when the i-sd02 i-gsm02 module is fitted.) Use this

feature if the alarm system shares a line with other

equipment. Select Downloading - Answer on One Ring.

When enabled, Downloader “warns” the control unit that

a call is coming by ringing the control unit number,

waiting for between one and two rings and then hanging

up. The control unit now knows to expect a call within the

next 10 to 90 seconds. Downloader then rings the control

unit again, within 10 to 90 seconds. The control unit

answers after the first ring.

Note: When using "Answer on One Ring" set the number

of rings in "Rings to Answer" to a higher number

than that used by the equipment sharing the

telephone line with the control unit. If you do not,

then the other equipment will never answer any

incoming calls.

Access Mode

This function allows you to provide extra security when a

remote PC is dialling into the system. Select Downloading,

Access Mode.

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 115 116

Pas de commentaire

Cooper Security i-on40 Guide d'installation Page 84