Cooper Security i-on40 Guide d'installation télécharger pdf (Page 43)

i-on40 Installer Mode Programming

Page 39

Type: Active when: Assign to

Partitions?

ATS Test (20) (This output type appears

only for Plug-by outputs.)

The line fault input signal

goes to 12V. The operation

of the Line Fault input and

the ATS test output

complies with the

requirements of BSIA form

175.

Siren (21) The control unit starts a full

alarm, a panic alarm or a

fire alarm (the siren has a

distinctive tone during a

fire alarm). The control unit

deactivates this output at

the end of the siren time.

See page 56 to choose the

siren duration.

Yes

Strobe (22) a) The control unit starts a

Full alarm, panic alarm or

fire alarm. The output

remains active until the

user disarms the system.

b) Setting or unsetting, if

you have selected “strobe

on set” and/or “strobe on

unset”, see pages 46 and

46.

Yes

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 115 116

Pas de commentaire

Cooper Security i-on40 Guide d'installation Page 43