Cooper Security i-on160EX Guide d'installation télécharger pdf (Page 113)

i-on160 Step by Step Programming Procedures

Page 107

Note: If you replace a wireless expander then you must teach the identity of

the new wireless expander to any receivers or output modules that had

previously learned the old wireless expander’s identity. This includes any

762s, 768s or WAMs.

Naming Wired and Radio Expanders

1. Enter Installer Menu.

INSTALLER MENU

Detectors/Devices >

2. Press Y.

DETECTORS/DEVICES

Detectors >

3. Press n until the display shows EITHER (if you

are adding a wired expander):

OR (if you are adding a radio expander):

DETECTORS

Wired Expanders >

DETECTORS

Radio Expanders >

4. Press Y .

(The rest of these instructions assume you are

naming a wired expander. The same instructions

will also work for a radio expander.)

WIRED EXPANDERS

Address Bus Device >

5. Press n until the display shows:

WIRED EXPANDERS

Edit Expander >

6. Press Y .

EDIT EXPANDER

Exp. W1-03 (W10)>

7. Press u or n to select the expander that you

wish to name. Then press Y.

The bottom line of the display shows “Name”.

Exp. W1-03

Name >

8. Press Y .

The bottom line of the display shows the

expander’s current name. The cursor is on the

first character on the left.

Exp. W1-03

9. See pa

e 12 for hints on how to edit names.

Exp. W1-03

Building 9

10. Press Y to save the text.

BUILDING 9

Name >

11. Carry on with any other programming that you

need to do. DON’T FORGET to leave the Installer

Menu in order to save the changes you have

made (see page 7 ).

1 2 ... 108 109 110 111 112 113 114 115 116 117 118 ... 179 180

Commentaires sur ces manuels

Pas de commentaire

Cooper Security i-on160EX Guide d'installation Page 113

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Cooper Security i-on160EX