Cooper Security i-on160EX Guide d'installation télécharger pdf (Page 38)

i-on160

Page 32

Installer Menu Options

This section contains reference information for the options provided in the

Installer Menu.

Detectors/Devices

Detectors

Adding or Deleting Radio Detectors

Add a Radio Detector To The System

To learn radio detectors select Detectors/Devices - Detectors – Add/Delete Detectors.

See page 110 for detailed instructions.

To use a radio zone the control unit must learn the identity of the radio

detector. When learning detectors you first select a radio expander to assign

that detector to, and then learn the detector’s identity. Remember that EXP-

R10 expanders can learn 10 radio detectors, while EXP-R30 expanders can

learn 30 detectors.

Deleting All Radio Detectors From The System

If you wish to remove all the radio detectors from the system then select

Detectors/Devices - Detectors – Add/Delete Detectors. When the display shows the

first radio expander press u and you will see Delete All on the bottom line of

the display. See page 112 for detailed instructions.

When you delete all radio detector the control unit sets all radio zones to Not

Used, and erases the identities of all the radio transmitters that it has learned.

Deleting All Zones From A Radio Expander

To delete all detectors from a single wireless expander then select

Detectors/Devices - Detectors – Add/Delete Detectors from the Installer Menu. The

bottom line of the display shows the first of the radio expanders. Press u or n

to display the expander you wish to delete detectors from. Press Y to select

the expander. The bottom line of the display shows the first of the zones

belonging to that expander. Press u and will see Delete All on the display. Press

Y to select the option. The display asks you to confirm your choice. Press Y to

finish deleting all the zones from the expander, or X if you wish to keep the

detectors.

If you press Y the control unit sets all zones belonging to the expander to Not

Used, and deletes the identities of all radio transmitters assigned to the

expander.

Deleting a Single Detector

To delete an individual detector select Detectors/Devices - Detectors – Add/Delete

Detectors from the Installer Menu. See page 111 for detailed instructions.

There are two options:

Delete Detector ID

Use this option to make the control unit “forget” the ID of the detector,

but leave any zone programming in place.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 179 180

Commentaires sur ces manuels

Pas de commentaire

Cooper Security i-on160EX Guide d'installation Page 38

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Cooper Security i-on160EX