Cooper Security i-on160EX Guide d'installation télécharger pdf (Page 129)

i-on160 Step by Step Programming Procedures

Page 123

20. Repeat steps 8 to 19 for any other keys you wish

to edit.

21. Press X to stop editing the keypad.

EDIT WIRED KEYPADS

Keypad K1-51 >

22. Carry on with any other programming that you

need to do. DON’T FORGET to leave the Installer

Menu in order to save the changes you have

made (see page 7 ).

Sirens

Adding a Radio Siren

(Please read the installation guide for the radio siren.) To make the control unit

learn the ID of a radio siren:

1. Enter Installer Menu.

INSTALLER MENU

Detectors/Devices >

2. Press Y.

DETECTORS/DEVICES

Detectors >

3. Press n until the bottom line of the display

shows:

DETECTORS/DEVICES

External Sirens >

4. Press Y .

EXTERNAL SIRENS

Add/Del Ext Siren >

5. Press Y.

The bottom line of the display shows the first of

the available radio expanders.

Note: This example assumes that your radio

expanders are bus devices 02 and 05. The

numbers may be different on the system you

are working on.

ADD/DEL EXT SIREN

Exp. R1-02 (R30)>

6. If required press u or n to select the expander

that you wish allocate the external siren to, for

example:

ADD/DEL EXT SIREN

Exp. R1-05 (R10)>

7. Press Y.

The bottom line of the display shows the first of

the device addresses used for radio sirens on

that expander. (See page 18 for an explanation

of radio siren numbering.) If a radio siren is

already learned into that address then the

bottom line of the display shows a “*” on the

left, and the name of the siren.

ADD/DEL EXT SIREN

*Siren 01 >

1 2 ... 124 125 126 127 128 129 130 131 132 133 134 ... 179 180

Commentaires sur ces manuels

Pas de commentaire

Cooper Security i-on160EX Guide d'installation Page 129

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Cooper Security i-on160EX