Cooper Security i-on160EX Guide d'installation télécharger pdf (Page 154)

Step by Step Programming Procedures i-on160

Page 148

Testing a Radio Panic Alarm:

1. Enter the installer menu and select Test (see

steps 1 to 4 in “To start testing” on page 144).

TEST

Sirens & Sounders >

2. Press n until the display shows:

TEST

User Panic Alarms >

3. Press Y.

The display instructs you to press both PA

buttons.

Press both PA

Buttons

4. Press and hold down both buttons on the PA at

the same time.

User: User 002

SS: 9

The display shows (for example):

“User 002” = The user who the remote is assigned to.

“SS9” = The radio signal strength of the remote.

5. Press X to finish the test.

TEST

User Panic Alarms >

Testing a Proximity Tag:

1. Enter the installer menu and select Test (see

steps 1 to 4 in “To start testing” on page 144).

TEST

Sirens & Sounders >

2. Press Y.

TEST

Sirens & Sounders >

3. Press n until the display shows:

TEST

Prox Tags >

4. Press Y.

The display instructs you to present the prox

tag to the keypad.

TESTING PROX TAGS

Present tag to panel

5. Hold the prox tag against the front of the

keypad.

The display shows the owner of the prox tag.

TESTING PROX TAGS

User: User 002

6. Press X to finish the test.

TEST

Prox Tags >

Sending a Test Call to an ARC Number:

1. Enter the installer menu and select Test (see

steps 1 to 4 in “To start testing” on page 144).

TEST

Sirens & Sounders >

2. Press u until the display shows:

TEST

ARC Reporting >

3. Press Y.

ARC REPORTING

1 2 ... 149 150 151 152 153 154 155 156 157 158 159 ... 179 180

Commentaires sur ces manuels

Pas de commentaire

Cooper Security i-on160EX Guide d'installation Page 154

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Cooper Security i-on160EX