Cooper Security i-on160EX Guide d'installation télécharger pdf (Page 123)

i-on160 Step by Step Programming Procedures

Page 117

partitions except partition 1.

11. Press Y to confirm your changes.

Keypad K1-53

Partitions >

12. Carry on with any other programming that you

need to do. DON’T FORGET to leave the Installer

Menu in order to save the changes you have

made (see page 7 ).

Adding a Radio Keypad

To make the control unit learn a Radio Keypad’s identity.

1. Enter Installer Menu.

INSTALLER MENU

Detectors/Devices >

2. Press Y.

DETECTOR DEVICES

Detectors >

3. Press n until the display shows:

DETECTOR DEVICES

Radio Keypads >

4. Press Y.

RADIO KEYPADS

Add/Del Radio Kpd >

5. Press Y.

The bottom line of the display shows the first of

the available radio expanders.

ADD/DEL RADIO KPD

Exp. R1-02 (R30)>

6. Press u or n to select the expander that you

wish allocate the radio keypad to.

Note: This example assumes that your radio

expanders are bus devices 02 and 05. The

numbers may be different on the system you

are working on.

ADD/DEL RADIO KPD

Exp. R1-05 (R10)>

7. Press Y.

The bottom line of the display shows the first of

the device addresses used for radio keypads on

the expander. (See page 18 for an explanation

of radio keypad numbering.) If a radio keypad is

already learned into the system at this address

then the bottom line of the display shows a “*”

on the left and displays the radio keypad’s name.

ADD/DEL RADIO KPD

RKP R1-05-01 >

8. Press u or n to select the device address that

you wish use.

ADD/DEL RADIO KPD

RKP R1-05-02 >

9. Press Y.

The bottom line of the display instructs you to

operate the keypad tamper.

Activate Radio

Keypad Tamper

1 2 ... 118 119 120 121 122 123 124 125 126 127 128 ... 179 180

Commentaires sur ces manuels

Pas de commentaire

Cooper Security i-on160EX Guide d'installation Page 123

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Cooper Security i-on160EX