Cooper Security i-on160EX Guide d'installation télécharger pdf (Page 57)

i-on160 Installer Menu Options

Page 51

Type: Active when: Assign to

Partitions?

Part Set D (37) Setting Part Set D. Deactivated on

unsetting Part Set D. (Available only in a

Part Setting system)

Set Fail (38) A set command fails. Remains active until

the user acknowledges the set fail.

Yes

Zone Follow

(39)

A specified zone has been triggered. When

you select this type for a zone the display

shows an extra “Follow” option for the

output. Use this option to select the zone

you wish the output to follow. (You can

also follow a “not used” zone or a “Log

Only”.)

Zone Alarm (40) The selected zone causes an alarm.

Deactivated when the alarm has been

reset. When programming this output type

the installer can select a specific zone for

the output to follow. (You can follow a “not

used” zone.)

Maskin

(41) The control unit operates this output

whenever a detector is giving a “mask”

signal (see page 64).

Autoset Warning

(42)

The control unit starts the Calendar Set

Warning period (see page 58). Deactivates

when the system sets, or if a user defers

or cancels the calendar set.

Yes (all

partitions by

default)

User Defined

(43)

The user switches the output on or off from

the keypad, or a remote control. Assign

this output type to any outputs that you

want the user to control.

Note: You cannot assign this output type to

a control unit plug-by-output.

See “Programming User Defined Outputs”

on page 51 for more details.

Yes

Programming User Defined Outputs

Output type 43 allows you to program User Defined Outputs.

User Defined outputs can be activated by one of the following events:

A user presses a button on a remote that has been programmed to activate

a User Defined output.

A user operates the output from the User Menu – Outputs On/Off option.

A user press one of the A, B, C or D keys on a keypad that the installer has

programmed to operate a User Defined output.

The timer associated with the output reaches its on or off time.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 179 180

Commentaires sur ces manuels

Pas de commentaire

Cooper Security i-on160EX Guide d'installation Page 57

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Cooper Security i-on160EX