Cooper Security i-on160EX Guide d'installation télécharger pdf (Page 93)

i-on160 Installer Menu Options

Page 87

IP Address This is the module’s own IP address. If you leave it blank

the service provider will give the module an IP address

using DHCP. (Cooper Security recommend that you leave

this field blank.)

Port Number If you wish to chan

e the port number used by the module

then key in the new port number here.

APN Key in the GPRS Access Point Name here.

Username Use this option to store the GPRS User ID.

Password Use this option to store the GPRS password.

If you have fitted an Ethernet module you will see the menu option “Module:

Ethernet”. This menu has the following options:

IP Address This is the module’s own IP address.

Sub-Net Mask If necessary, key in the sub-net mask, for example

“

255.255.255.000”.

Note: If you leave IP Address and Sub-Net Mask blank then

the control unit will use DHCP (Dynamic Host Control

Protocol) to obtain these values from a DHCP server.

Gateway Address This is the IP address of the router that connects the local

network, to which the i-on160EX is connected, to rest of

the Internet (or to a larger network).If necessary, key in

the gateway IP address.

Downloading

The control unit can communicate with Downloader software running on a PC.

Downloader connects with the control unit either locally over the USB

(Universal Serial Bus) port or, if you have fitted a communications module,

remotely over a telephone line.

While connected Downloader can inspect and/or change the control unit’s

programming configuration. If you do not wish to change the configuration you

can simply monitor the state of the control unit and its zones from the PC.

In order to use Downloader software you must program following options:

Account

As part of ensuring the security of a connection, Downloader must use an

account name and serial number for each control unit.

While the control unit is in Installer Menu you can change the account name

and serial number from the keypad: Select Communications - Downloading –

Account.

Account Name: This can be any string of alphabetic characters or numbers up

to 16 characters long.

Serial Number: This must be an eight digit numerical string. If the number you

wish to use has less than eight digits then insert leading zeroes.

Connection Type

To choose which physical connection you wish to use select Downloading –

Connection Type. The options available are:

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 179 180

Commentaires sur ces manuels

Pas de commentaire

Cooper Security i-on160EX Guide d'installation Page 93

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Cooper Security i-on160EX