Cooper Security i-on160EX Guide d'installation télécharger pdf (Page 141)

i-on160 Step by Step Programming Procedures

Page 135

If you are programming a partitioned system then at this point, for some

output types, the top line of the display shows “Partition?”. The bottom

line of the display shows “Partition 1 Yes”. This means that the system is

asking if you want to allocate the output to Partition 1.

You can remove the output from Partition 1 by pressing

to change

the “Yes” to a “No”.

Press

to scroll to other Partitions. Press

to assign the

output to each Partition as required.

Press

when you have finished assigning outputs to Partitions.

Naming a Wired Output

1. Enter Installer Menu.

INSTALLER MENU

Detectors/Devices >

2. Press n until the display shows:

INSTALLER MENU

Outputs >

3. Press Y.

OUTPUTS

Radio Outputs >

4. Press n.

OUTPUTS

Wired Outputs >

5. Press Y.

The display shows the first group of wired

outputs available for editing: those on the

panel.

EDIT OUTPUTS

Panel >

6. If required, press u or n until the display

shows the expander whose outputs you wish to

edit.

EDIT OUTPUTS

Exp. W1-01 (W10)>

7. Press Y.

The top line of the display shows the first in a

list of the wired outputs for the group you

selected in step 6. For example, if you selected

an expander:

EDIT O/P W1>01>01

Not Used >

8. Press u or n until the display shows the output

you wish to edit, for example:

EDIT O/P W1>01>03

O/P W1>01>03 >

9. Press Y.

Note: If the output has the type “Not Used” you will

not be able to change its name. Go to page

133 to change the type of the output.

EDIT O/P W1>01>03

Name >

10. Press Y.

The bottom line of the display shows the

output’s current name. The cursor is on the first

character on the left.

EDIT O/P W1>01>03

O/P W1>01>03

1 2 ... 136 137 138 139 140 141 142 143 144 145 146 ... 179 180

Commentaires sur ces manuels

Pas de commentaire

Cooper Security i-on160EX Guide d'installation Page 141

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Cooper Security i-on160EX