Cooper Security i-on160EX Guide d'installation télécharger pdf (Page 73)

i-on160 Installer Menu Options

Page 67

Select this

option:

The control unit deletes:

User All user access codes, their PAs, prox tags, and remote

controls. User 01 access code changes to 1234, and

installer access code to 7890 (123456 and 567890 in six

digit access codes). This option has the same effect as

restoring power to the control unit with the Code Reset

pins shorted.

Zones All information relating to zones: types, attributes and

partitions. For radio zones the control unit retains the

IDs of any detectors that the control unit has already

learned.

Radio Devices All IDs for all learned radio devices. This menu presents

each type of radio device is sub-menu:

Detectors: Delete radio detectors only.

External Sirens: Delete external sirens only.

Keypads: Delete all radio keypads only.

WAMs: Delete all WAMs.

Alternatively you can delete All Devices at once.

Outputs All programming for outputs.

Setting Information All programming for setting options.

System Options All programming for system options.

Communications All programming for communications.

Factory Defaults

If you wish to remove all programming from a control unit (perhaps to re-

install it at another site) select this option.

Note that Factory Defaults erases all wireless devices, names and stored texts.

However, selecting Factory Defaults does not erase the log, or delete any users

Installer Name

This field controls the user name employed by the login screen of the i-

on160EX Web Server. When logging in to the Web Server you must key into

the username field the same text as you have programmed into the Installer

Name field. Note that the username field on the Web Server login is case

sensitive.

Installer Code

The default Installer access code is 7890 (567890 with six-digit access codes).

Cooper Security Ltd recommend that you change this code to some other

number. To change the Installer access code select System Options-Installer

Code.

The Installer code allows you to enter the Installer Menu, and carry out an

Installer reset. However, the Installer code does not allow you to set or unset

the system.

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 179 180

Commentaires sur ces manuels

Pas de commentaire

Cooper Security i-on160EX Guide d'installation Page 73

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Cooper Security i-on160EX